Distinguish the doorway from the enclosure
Ask the supplier to identify the clear entrance on the current model drawing. This is different from the cylinder diameter and the clear space inside the cabin. Each measurement answers a separate question, and all of them matter when assessing whether the lift suits the intended user.
For example, the STORY & CORE catalogue gives a nominal 900 mm clear door opening for the SC 250 reference. This is a brochure reference, not approval of a particular wheelchair route. Confirm the current configuration, door arrangement and installation drawing before developing a project around that figure.
Draw the approach, entry and exit
Show how a person reaches each landing from the rooms they use. Include nearby room doors, corridor turns, furniture and any changes in floor level. A clear doorway can still be difficult to reach if the surrounding plan forces an awkward approach.
If a mobility aid will be used, review the actual aid, user and any accompanying person with the supplier. Assess entering, positioning in the cabin and leaving at every stop. Do not infer independent access, turning space or suitability from the rated load or a general accessibility description.
Confirm door movement and orientation
Ask which entrance orientations and door arrangements are available for the exact model. Have the selected configuration shown on every floor plan. A position that is convenient downstairs may face a room door or narrow circulation space upstairs.
Keep the door movement area clear in the interior layout. Avoid locating loose furniture, a decorative console or a new wall feature where it interferes with the approved entrance arrangement. Any later interior changes should be reviewed against the operating and access requirements.
Coordinate the threshold with the landing finish
Review the junction between cabin flooring and the landing. Confirm the finished levels and permitted floor build-ups with the supplier and contractor. A visual intention such as continuous stone flooring still needs an agreed technical detail and responsibility for making good.
Consider how lighting, reflections and control visibility affect the arrival experience. Confirm the controls actually offered, their location and the intended users’ needs. Decorative finishes should not conceal required access points, labels or equipment interfaces.
Approve access before fixing the programme
Resolve the entrance layout while model and drawing decisions can still be coordinated. STORY & CORE uses an indicative 3–4 week programme from inception to handover for vacuum lift planning; late access changes can affect the agreed sequence and scope.
Send plans showing the approaches at all stops, photographs and mobility-aid dimensions where relevant. The final review should establish the proposed model, clear access and responsibilities in writing. A general planning article cannot certify accessibility or establish the applicable project requirements.
Common questions
Does a 900 mm brochure doorway guarantee wheelchair access?
No. Confirm the actual chair, user, doorway configuration, cabin and landing route against the current technical drawing and project requirements.
Can the door face a different direction on each floor?
Ask the supplier which arrangements the selected model permits. Show the confirmed orientation at every stop before approval.
What measurements should I provide?
Provide the available landing route, surrounding door positions and measured plans in millimetres, plus the actual mobility-aid dimensions where relevant.
Continue planning your lift
References and scope
- STORY & CORE residential catalogue: confirm current model specifications
- PVE residential planning: manufacturer examples of model and access review
Manufacturer references explain general principles or their own equipment. They do not establish STORY & CORE partnerships, model certification or project-specific performance. Final specifications and responsibilities require confirmation for the proposed installation.
Review your villa drawings
Share your floor plans, intended stops and interior priorities with STORY & CORE. Start with home lift planning and confirm the equipment, building interfaces and agreed scope in the project proposal.