What space must be checked before ordering?

Check the outside equipment envelope, internal cabin, clear doorway, landing approach, floor openings, overhead and maintenance access separately. All dimensions should be confirmed in millimetres on the current project drawing. Catalogue dimensions are reference information and must not be used as construction opening sizes.

See the SC model comparison and door and landing access guide. Wheelchair suitability requires assessment of the actual user, chair and complete route.

The cylinder footprint is only the starting point

Ask for the installation drawing for the exact proposed model. It should distinguish the outside enclosure from the usable cabin and clear door opening. These measurements answer different questions. A cylinder may fit beside a staircase while the entrance remains awkward to approach or the cabin cannot accommodate the intended user comfortably.

Record all project dimensions in millimetres and identify whether each measurement refers to structure or finished surfaces. Wall linings, floor finishes and ceiling work can change the space available after the initial survey. Avoid instructing openings from a brochure image or assuming that two similar-looking pneumatic lifts need identical space.

The floor opening needs its own check

An opening through a floor must suit the selected equipment and the building. Ask the supplier to identify the required finished opening, fixing or support interfaces and any landing protection. The structural consultant should assess the proposed location before a contractor cuts an existing slab. A suitable architectural position still needs a structural review.

Compare the opening position on every served level. A clear ground-floor corner might sit below a bedroom, a beam or a narrow upstairs corridor. Show the lift on coordinated plans and a building section so the project team can review the complete vertical route rather than separate floor plans.

Overhead and machinery affect the upper landing

Overhead means the space above the highest landing that the equipment needs. It is separate from the distance travelled between floors. Ask for the required clearance after the ceiling finishes, together with the position of the machinery and the access needed to maintain it.

PVE documents equipment arrangements with machinery above the cylinder and alternatives with remotely positioned machinery. These are manufacturer examples, not interchangeable options for every pneumatic elevator. Ask the proposed supplier to confirm which arrangement is available for the selected model and to show any connecting routes on the project drawing.

A compact lift still needs a usable arrival space

Check the approach to each door with surrounding furniture and room doors shown. Consider how someone enters with shopping, turns at the landing and leaves the cabin. If a household member uses a mobility aid, review the actual equipment and movement requirements with the supplier rather than relying on a general accessibility label.

Before requesting a quotation, prepare floor plans, floor-to-floor heights, photographs and the intended stops. Add the intended users and any access priorities. STORY & CORE can use this information to discuss the architectural brief and identify the drawings and supplier confirmations needed for a project-specific assessment.

Related vacuum and pneumatic lift guides

Common questions

What is the minimum space for a vacuum elevator?

There is no single minimum for all models. Check the enclosure, floor opening, clear entrance, landing approach, overhead and machinery requirements on the current model drawing.

Does a small pneumatic lift suit a wheelchair user?

A small outside footprint does not establish wheelchair suitability. Review the actual chair, entrance, internal space and landing access against the proposed model.

Further reading

Your villa lift brief

For a useful first review, share your floor plans, property location and the floors you want to connect. Include floor-to-floor heights in millimetres if available, photographs of the proposed position and any mobility or design priorities. The selected supplier must confirm equipment suitability, current drawings and the agreed installation and aftercare scope.

Share your villa lift requirements

Plan the next step

Explore home lift planning in Dubai with Story and Core. Share your property, available drawings and priorities so the project scope can be discussed.